UC100 USB Motion Controller





  • Automatic firmware checking and firmware update.
  • Motion control on upto 6-axis (X, Y, Z, A, B, C).
  • Configurable maximum stepping frequency, the options are 25kHz(with 20usec pulse length), 50kHz(with 10usec pulse length), 100kHz(with 5usec pulse length).
  • On the fly configurable 12 pieces of 5Volt (TTL level) buffered outputs. The current sink/source capability is 20mA max. per output.
  • On the fly configurable 5 pieces of 5V (TTL level) schmitt triggered and filtered inputs. The input internal pullup resistance to 5Volts is 4.7kOhms.
  • About 1 second long communication buffer.
  • 100% LPT port compatible pinout.

Supported Mach3 functions:


    • Jog.
    • Reference inputs.
    • E-stop input.
    • Softlimits.
    • Limit switch inputs.
    • Limits override.
    • Index input (extended function supports multi slot spindle sensors, for Mach3-mill only, not for Mach3-turn!).
    • Spindle speed PWM control output.
    • Step and direction spindle control output.
    • Spindle and coolant relay control.
    • Charge pump safety signal output (configurable to active/inactive when in E-stop).
    • Charge pump adjustable frequency (12.50kHz in normal or 5kHz in laser mode).
    • All signals configurable to active High/Low.
    • General purpose I/O signals handling.
    • Offline mode.
    • All MPGs and encoders support. (2pcs maximum one time)
    • Slave axis.
    • Backlash compensation.
    • Digit/probe input.
    • THC control inputs.

Add to Cart:

  • Model: UC100
  • Shipping Weight: 0.35kgs
  • 4 Units in Stock

Your IP Address is:
Copyright © 2020 CNCRoom.