Author Topic: Mach3 User/ new member  (Read 7064 times)

0 Members and 1 Guest are viewing this topic.

Offline bk_sattahip

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 3
Mach3 User/ new member
« on: April 02, 2009, 05:03:11 PM »
Hello Everyone,

 I did not realize the Mach3 community was so big here in Thailand!

Anyways we would like to mention that we have been using Mach3 for over 2 1/2 years now on a plasma/ oxy fuel cutting table that at times is run unattended during the night. We start the job, turn the lights off and come back in the morning to find the plate cut. We now just started using Mach3  on a large old knee milling machine now as well with Servo's.

Mach3 is a very great product and I am glad to hear there is a intrest here in Thailand to use it as well.

BK

Offline Weerasak

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 1469
  • -Receive: 3764
  • Posts: 2777
Re: Mach3 User/ new member
« Reply #1 on: April 02, 2009, 05:18:19 PM »
Hi Brian,

It's nice to see you here.

Have you seen my last post in yahoogroup-mach1mach2cnc?

I need your opinion and support overthere to get Art to investigate his work with Thai languange.

Thank you

Weerasak

Offline bk_sattahip

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 3
Re: Mach3 User/ new member
« Reply #2 on: April 02, 2009, 06:33:15 PM »
Khun Weerasak,

Can I contact you outside of this forum?

BK

Offline bk_sattahip

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 3
Re: Mach3 User/ new member
« Reply #3 on: April 04, 2009, 10:22:47 AM »
 I was just reading the Mach3 support forum about a future upgrade to Mach 3 requiring a license code to run the software for each individual PC. This is to stop piracy I guess. There was also mention in Art's comment about the request to fix Thai Language issue and after reading Art's comments I can see that he has no intention to look at this problem due to the number of illeagal copies in use.

The truth is I suppose, You get what you pay for. If you guys want the Thai Lang fixed get together all the paid users, compile a list of the users and push for it, but if you just leave this up to one guy, Khun Weerasak I don't think he has much power to push this thru.

I am a paid user and registered here in Thailand with Mach3 :), so you guys can add me to the list for Thai users. I will help push the fix  if there is enough paid users here to support and fight for Art to work on this. :). Understand if there is like 3 paid users here we are waisting our time asking for Art's help.

BK

Offline Weerasak

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 1469
  • -Receive: 3764
  • Posts: 2777
Re: Mach3 User/ new member
« Reply #4 on: April 04, 2009, 07:27:25 PM »
Hi Brian,

Thank you for your suggestive opinion. Actually I had mentioned similar things to community before I asked Art for his favor. I need to know members’ or guests’ name even though the purchase wasn’t made through cncroom.com

การแก้ไขปัญหาตรงนี้ เราสามารถช่วยกันคนละไม้คนละมือครับ คนไหนที่มีไลเซนส์อย่างถูกต้อง ให้ช่วย PM มาหาผมด้วยการส่งชื่อที่ได้ไลเซนส์ (ไฟล์ไม่ต้องส่งมา) อีเมล์แอสเดรสที่ใช้ติดต่อกับทีมงาน Mach3

หากจำนวนมากพอผมจะคุยกับเค้าให้ช่วยแก้ไขให้ครับ ซึ่งคาดว่าเค้าน่าจะเห็นความเดือดร้อนของเรานะครับ

So, because I’m not Farang, I didn’t pickup the feeling of no intention, thank you for mention it.

However, Soon or later we are forced to register our using of Mach3 through web based registering system by that time there should be more members to show up him or herself, and I'll raise  “Mach3 driver is not friendly with Thai” to Art again.

Thanks
Weerasak

Offline Weerasak

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 1469
  • -Receive: 3764
  • Posts: 2777
Re: Mach3 User/ new member
« Reply #5 on: April 17, 2009, 11:38:03 AM »
Hi Brian,

Here is a good news for your staff.

http://www.cncroom.com/index.php?main_page=product_info&cPath=6&products_id=33&language=en

Thank you,
Weerasak

Offline Toon At Kanchanaburi

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 5
Re: Mach3 User/ new member
« Reply #6 on: October 18, 2015, 03:23:01 PM »
Hi Brian,

It's nice to see you here.

Thank you

Offline thelight

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 3
Re: Mach3 User/ new member
« Reply #7 on: March 03, 2016, 09:03:29 PM »
gg

Offline Lauraroalo

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 6
Mach3 User/ new member
« Reply #8 on: October 25, 2016, 11:59:50 AM »
Very nice story - and with a happy ending

Share some pictures of the GS and the GT if you would like.

We like cars - but like you we like Mach 1s best.

___
NEW XRumer 12.0.19 + SocPlugin: revolutional method in SEO and SMM

Offline pera.nul

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 5
Re: Mach3 User/ new member
« Reply #9 on: April 22, 2017, 04:06:01 PM »
Thank

Offline amataminicnc

  • Jr. Member
  • **
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 5
Re: Mach3 User/ new member
« Reply #10 on: January 23, 2018, 01:56:41 PM »
Hello Everyone,

 I did not realize the Mach3 community was so big here in Thailand!

Anyways we would like to mention that we have been using Mach3 for over 2 1/2 years now on a plasma/ oxy fuel cutting table that at times is run unattended during the night. We start the job, turn the lights off and come back in the morning to find the plate cut. We now just started using Mach3  on a large old knee milling machine now as well with Servo's.

Mach3 is a very great product and I am glad to hear there is a intrest here in Thailand to use it as well.

BK

Oh

Offline Tunwa

  • Jr. Member
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 4
Re: Mach3 User/ new member
« Reply #11 on: July 11, 2018, 09:15:41 PM »
ขอบคุณครับ

Offline rainamta

  • Jr. Member
  • **
  • Thank You
  • -Given: 4
  • -Receive: 0
  • Posts: 3
Re: Mach3 User/ new member
« Reply #12 on: June 14, 2019, 07:48:36 AM »
ขอบคุณครับที่รับเข้ากลุ่ม ครับ มือใหม่ครับ