Applied Motion 5034-368D 7A Stepper

2,900.00บาท  2,100.00บาท
ลดลง: 28%

Part Number: 5034-368D
Frame Size: NEMA34, Double Shaft
Motor Type: Standard torque
Motor Length: 3.70 inches
Number of Lead Wires: 8
Bipolar Holding Torque: 424oz-in
Step Angle: 1.8deg

Specifications
Bipolar Series Inductance: 11.6mH/phase
Bipolar Parallel Current: 7.07A/phase
Bipolar Parallel Resistance: 0.25Ohms/phase
Bipolar Parallel Inductance: 2.9mH/phase
Unipolar Current: 5.0A/phase
Unipolar Resistance: 0.5Ohms/phase
Unipolar Inductance: 2.9mH/phase
Rotor Inertia: 1.74E-02oz-in-sec2
Weight: 5.9 lbs
Storage Temperature: -40to70°C
Operating Temperature: -10to40°C
Insulation Class Class B (130ºC)
Maximum Radial Load: 25lbs
Maximum Thrust Load: 50lbs
Shaft Run Out: 0.001inch T.I.R.max
Radial Play: 0.001inch max w/1.0lb load
End Play: 0.001 inch max w/15.0lb load
Perpendicularity: 0.003inches
Concentrically: 0.002inches

Datasheet

หยิบลงรถเข็น:

  • รุ่น: 5034-368D
  • น้ำหนักขนส่ง: 3.7 กก.
  • 9 ชิ้นในสต็อก



ลูกค้าที่ซื้อสินค้าชิ้นนี้ จะซื้อสินค้านี้ด้วย...


หมายเลข IP ของคุณคือ: 54.162.164.247
Copyright © 2017 CNCRoom.