Author Topic: WIRE DT02 Wireless Tool Setting to UB1 Board  (Read 400 times)

0 Members and 1 Guest are viewing this topic.

Offline Mario

  • Jr. Member
  • **
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 3
WIRE DT02 Wireless Tool Setting to UB1 Board
« on: January 23, 2020, 03:47:44 AM »

Hi,
I am trying to connect the
"DT02 Universal CNC Center Low-power Wireless Tool Setting Gauge Presetter Device" on the UB1 board, unfortunately I can't.

I connected:
5-24 V to +24 DC  POWER
0V to COM DC  POWER

PROBE to X315 UB1 (PNP INPUT)
COM to COM UB1

The transmission leds are functional but there is no voltage on the wires that must be connected to UB1 (as shown in the video below)
I don't want the DT02 CNC tool setting to be broken, I just bought it ... :-\ :o


link to manual DT02 CNC tool :
https://www .solidrop.net/product/high-accuracy-dt02-universal-cnc-router-machine-wireless-tool-setting-gauge-presetter-controller-1-micron-mach3-weihong-etc.html

link to my measurements with the tester
https://youtu.be/zjZ17rqLqAs


thanks you
Mario