แปลมาเป็นภาษาอังกฤษ
WELCOME TO SITE TURBOCNC 5 FOR WINDOWSThis is a robust and efficient CNC interpreter used to control machines with up to 8 axes of movement. The version 5 TurboCNC is the first to run natively on the Windows platform, which helps enormously in productivity, allowing you to run some CAD software, to operate the CNC machine from the same computer.
With this new version will no longer be necessary to create the boot disk to restart in MS-DOS or even figure out how to configure USB drives in MS-DOS. Moreover, the GUI is much better and has a graphic viewer toolpath (currently available only for around) that can follow the production of the play in real time.
The beta version is limited to 100 lines of code that can be implemented. Prices for this new version has not yet been established, but will soon offer the final version for sale, right here on the site.
Features: Outputs Step / Dir fully configurable - Compatible with MaxNC (not the type of closed circuit) cards and HobbyCNC, Geckodrives, and all types of drivers Camtronics;
G-code standard RS-274D - Work with programs such as CAM DeskEngrave, VectorCAM, ACE convert, among others;
Editor of code - it has the function to stop (abort) and re-start from any point of the program, and has no limitation on the size of file to be opened;
8 axles with movements simultaneously - Allows configure any combination or rotated with compensation of clearances;
Doors of I / O configurable - Allows configure any port of I / O such as pumps refrigerants, key end-of-course, staples, spikes of evidence, jog encoders and PLC's;
Parameterized programming - Possibilitanto use variables, subroutines and expressions in the programming code;
Handling Custom - Linear, circular and helical interpolation using IJ or R rating;
Compatible with various CNC machines - Lathes, Frezadoras, Customized drills and machines such as robotic arms;
Tools configurable - Allows setup and save the placement of up to 60 different tools.
For our facility we now have native support the following technologies: USB - Very useful to copy and distribute the programs for a CNC thumb-drive;
Highest Speed Communication - We improve the speed of transmission of the pulses of the parallel port, through the low-level routines implemented in the Windows Kernel;
Graphical Interface - Very useful to be able to monitor and improve the simulation of production of parts;
Transfer Area - Now you can use the resources of Copy, Cut and Paste available the Clipboard in Windows, very useful in editing and reuse of code by the operator of the CNC program.
Requirements: Operating System - Windows 2000/XP/Vista; recommend using Windows XP with Service Pack 3 installed;
Hardware - Parallel port communication;
PC - Any computer that run Windows XP with a good performance. Recommended using Pentium IV or higher, with at least 1GB of RAM.
Credits: DAK Engineering - in particular would like to thank Mr. Dave Kowalczyk c / o DAK Engineering held by the partnership and help in developing this new version.
AST Industry - The initial development of this new version for Windows was carried out by AST Industry, which was for a long time user of TurboCNC in MS-DOS environment.